Looking for Metal roofing installation services in Vancouver BC?

Imagine a roof you will never have to replace.

Metal Roofing installation
Standing seam Metal Roofing

Metal roofing installation in Vancouver BC and you are finding it hard to find qualified metal roof installers? At GVRD Roofing Inc. we have metal roofing installation professionals that specialize only in Metal roofing. When you hire a metal roofing contractor there is lots to think about.

First consider what you want to see and how long you want your roof to last. Installing a metal roof seems easy. Fact is if your contractor cuts corners you could find yourself with a leaking metal roof that could cost thousand to fix. All standing seam roofs start with underlayment, underlayment is the key to keeping your home dry.

Many metal roofing contractor will sell you on a metal roof but when they install your underlayment it is not what they say. When you install underlayment make sure the metal roofing contractor uses a plastic cap nail otherwise it will fail and you won’t be able to get a manufacturer warranty. Second if your roof is low slope or under 4/12 pitched roof make sure your contractor installs ice and water shield, otherwise known as peel and stick. Peel and stick is installed onto to a dry surface and does not need staples.


We do not install any metal roof without high quality heat rated peel & stick remember you get what you pay for… Remember if you’re just looking for metal roofing repair and information on greater Vancouver’s best metal roofing installer. looking for Metal roofing installers then call us 24/7 because we are open from dusk till dawn 7 days a week.

Always ready for any emergency repair service. GVRD Roofing Inc. Is built on providing the very best roofers for every type of roof. We hire the very best roofers we can find 100% guarantee.



If you are looking for a roof built to last or want to find a metal roofing contractor if installer then contact a professional metal roofing contractor today. GVRD Roofing Inc. have seen so many metal roofs that have been installed to bare minimums so be sure to know what you’re getting.

When measuring your roof and before we order your sheet metal panels we make sure that the ever metal panel is the right size and that ever standing seam panel end is notched so when it arrives on site we can lock the metal panels in and that we can bend the tops to ensure the water can not penetrate the underlayment.

Locking panels cost more and many roofing companies will cut cost by running panels without notching. All roofing panels should have a 1 ” notch on top and on bottom. Average cost to do this is an extra approximate $4.00 a panel so the cost can add up. Roofing panels need to be notched so all panels lock in and water cant travel up or into areas. Eave flashing is custom made to fit to the pitch of your roof and is made to lock panels down and the notch at the top of the panel makes sure water doesn’t travel up and under the metal roof panels.

Metal Roofing Installation

metal roofing installers

Quality isn’t hard to find at GVRD Roofing because we pay for quality because we believe that quality will stand the test of time in all weather conditions. To find out more about Metal roofing call us today.